Bicycle Disc Brake Pads for Tektro Novela IOX Disc Brakes Semi Metallic 4 Pair
Bicycle Disc Brake Pads for Hayes Sole Mechanical CX Pro Expert Comp GX-C GX-2

Bicycle Disc Brake Pads for Zoom DB280 DB350 DB450 DB550 DB650 Alongha

0 reviews

$4.03

SKU: DBP015-1
  • Resin brake pads for the maximum initial bite
  • Short break-in period, Stable and quieter
  • Low disk wear and comfortable braking feel
  • Organic elixir brake pads make less noise than sintered metal pads and offer better modulation
  • Package Include: 4 pairs bike brake pads
x
Ask B2B Quote
Add to wishlist

Description

Product Overview

These bicycle disc brake pads deliver maximum initial bite with a short break‑in period for stable, quieter braking. The organic compound generates less noise than sintered metal pads while offering better modulation and lower disc wear. Package includes 4 pairs for complete brake maintenance.

 

Semi-Metallic-Brake-Pads

Semi-Metallic-Brake-Pads

Installation precautions

If the brake fluid comes into contact with the brake pads or if the brake pads wear down to 0.5mrm when injecting brake fluid, please replace the brake pads.

  1. First, remove the wheels from the frame and take out the old brake pads according to the diagram.
  2. Next, thoroughly clean the piston and its surroundings.
  3. Then, refer to item (1) in the article “Injection of Mineral Oil” and remove the cap of the reserve tank.
  4. At this time, press the piston back to the bottom smoothly, being careful not to pry it off. Meanwhile, note that oil may overflow from the reserve tank – please pay attention.
  5. After that, install the new brake pads and attach the brake pad adjustment pads.
  6. Next, squeeze the brake lever several times to confirm that the brake operation is firm.
  7. Then, remove the brake pads, install the wheel, and confirm that there is no contact between the disc and the brake pads. If there is contact, adjust according to the caliper installation steps.
  8. After confirming the oil level, install the cap of the reserve tank.
  9. Finally, return the brake lever to its original position.

Semi-Metallic-Brake-Pads

Semi-Metallic-Brake-Pads

Semi-Metallic-Brake-Pads

 

Additional information

Weight 0.1 kg
Dimensions 12 × 3 × 9 cm
Leave your review
Rating
Publish review

Related Products

Description

Product Overview

These bicycle disc brake pads deliver maximum initial bite with a short break‑in period for stable, quieter braking. The organic compound generates less noise than sintered metal pads while offering better modulation and lower disc wear. Package includes 4 pairs for complete brake maintenance.

 

Semi-Metallic-Brake-Pads

Semi-Metallic-Brake-Pads

Installation precautions

If the brake fluid comes into contact with the brake pads or if the brake pads wear down to 0.5mrm when injecting brake fluid, please replace the brake pads.

  1. First, remove the wheels from the frame and take out the old brake pads according to the diagram.
  2. Next, thoroughly clean the piston and its surroundings.
  3. Then, refer to item (1) in the article “Injection of Mineral Oil” and remove the cap of the reserve tank.
  4. At this time, press the piston back to the bottom smoothly, being careful not to pry it off. Meanwhile, note that oil may overflow from the reserve tank – please pay attention.
  5. After that, install the new brake pads and attach the brake pad adjustment pads.
  6. Next, squeeze the brake lever several times to confirm that the brake operation is firm.
  7. Then, remove the brake pads, install the wheel, and confirm that there is no contact between the disc and the brake pads. If there is contact, adjust according to the caliper installation steps.
  8. After confirming the oil level, install the cap of the reserve tank.
  9. Finally, return the brake lever to its original position.

Semi-Metallic-Brake-Pads

Semi-Metallic-Brake-Pads

Semi-Metallic-Brake-Pads

 

Leave your review
Rating
Publish review

Related Products