Default Welcome Msg
Bicycle Disc Brake Pads for Sram Avid Elixir Trail, X0 Trail, Elixir 7 Trail, Elixir 9 Trail
$4.03
- Resin brake pads for the maximum initial bite
- Short break-in period, Stable and quieter
- Low disk wear and comfortable braking feel
- Organic elixir brake pads make less noise than sintered metal pads and offer better modulation
- Compatible with:Sram Avid Elixir Trail, X0 Trail, Elixir 7 Trail, Elixir 9 Trail, Guide, Guide R, Guide RS, XOTR-M, XOTR-O, XOTR-O-AL
- Package Include: 4 pairs bike brake pads
- Description
- Additional information
- Reviews (0)
Description
Product Overview
These bicycle disc brake pads compound generates less noise than sintered metal pads while offering better modulation and lower disc wear. Compatible with Sram Avid Elixir Trail, X0 Trail, Elixir 7 Trail, Elixir 9 Trail, Guide, Guide R, Guide RS, XOTR-M, XOTR-O, XOTR-O-AL, and more. Package includes 4 pairs for complete brake maintenance.These brake pads bicycle compound generates less noise than sintered metal pads while offering better modulation and lower disc wear. Compatible with Shimano D02S, Saint M810, M820, M640, TRP, Quadiem, Slate, and more. Package includes 4 pairs for complete brake maintenance.
Installation precautions
If the brake fluid comes into contact with the brake pads or if the brake pads wear down to 0.5mrm when injecting brake fluid, please replace the brake pads.
- First, remove the wheels from the frame and take out the old brake pads according to the diagram.
- Next, thoroughly clean the piston and its surroundings.
- Then, refer to item (1) in the article “Injection of Mineral Oil” and remove the cap of the reserve tank.
- At this time, press the piston back to the bottom smoothly, being careful not to pry it off. Meanwhile, note that oil may overflow from the reserve tank – please pay attention.
- After that, install the new brake pads and attach the brake pad adjustment pads.
- Next, squeeze the brake lever several times to confirm that the brake operation is firm.
- Then, remove the brake pads, install the wheel, and confirm that there is no contact between the disc and the brake pads. If there is contact, adjust according to the caliper installation steps.
- After confirming the oil level, install the cap of the reserve tank.
- Finally, return the brake lever to its original position.
Additional information
| Weight | 0.1 kg |
|---|---|
| Dimensions | 12 × 3 × 9 cm |
Leave your review
Related Products
-
Bar Tape, Components, Parts & StemBicycle Handlebar Tape 210cm Length PU Leather Wear Resistance
$5.55 - $6.86There is no AI review summary.Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Components, Saddles, Saddles & PostsKids Balance Bike Saddle 22.2mm Seatpost PU Padded Comfort Replacement
$11.18There is no AI review summary. -
Components, Saddles, Saddles & PostsKids Bike Seat 22mm Seatpost Ultra Soft Waterproof PU Leather Bike
$3.23There is no AI review summary. -
Cleats, Components, Pedals & CleatsRoad Bike Pedal Cleats For Shimano SPD‑SL SM‑SH11 Compatible
$4.56 - $8.37There is no AI review summary.Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Components, Grips, Parts & StemRubber Plastic 120mm Length Ergonomic Design Bike Handlebar Grips
$2.30There is no AI review summary.
- Description
- Reviews (0)
Description
Product Overview
These bicycle disc brake pads compound generates less noise than sintered metal pads while offering better modulation and lower disc wear. Compatible with Sram Avid Elixir Trail, X0 Trail, Elixir 7 Trail, Elixir 9 Trail, Guide, Guide R, Guide RS, XOTR-M, XOTR-O, XOTR-O-AL, and more. Package includes 4 pairs for complete brake maintenance.These brake pads bicycle compound generates less noise than sintered metal pads while offering better modulation and lower disc wear. Compatible with Shimano D02S, Saint M810, M820, M640, TRP, Quadiem, Slate, and more. Package includes 4 pairs for complete brake maintenance.
Installation precautions
If the brake fluid comes into contact with the brake pads or if the brake pads wear down to 0.5mrm when injecting brake fluid, please replace the brake pads.
- First, remove the wheels from the frame and take out the old brake pads according to the diagram.
- Next, thoroughly clean the piston and its surroundings.
- Then, refer to item (1) in the article “Injection of Mineral Oil” and remove the cap of the reserve tank.
- At this time, press the piston back to the bottom smoothly, being careful not to pry it off. Meanwhile, note that oil may overflow from the reserve tank – please pay attention.
- After that, install the new brake pads and attach the brake pad adjustment pads.
- Next, squeeze the brake lever several times to confirm that the brake operation is firm.
- Then, remove the brake pads, install the wheel, and confirm that there is no contact between the disc and the brake pads. If there is contact, adjust according to the caliper installation steps.
- After confirming the oil level, install the cap of the reserve tank.
- Finally, return the brake lever to its original position.
Leave your review
Related Products
-
Brake Rotors, ComponentsAluminium Alloy Bike Disc Brake Hub Adapter for Mountain Bike
$7.10 - $8.76There is no AI review summary.Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Bar Tape, Components, Parts & Stem
Bicycle Handlebar Tape 210cm Length PU Leather Wear Resistance
$5.55 - $6.86There is no AI review summary.Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Components, Saddles, Saddles & PostsClassic Rivet Soft Bicycle Saddle Fit for Road Bike Fixed Gear Bike
$5.09 - $6.29There is no AI review summary.Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Components, Saddles, Saddles & Posts
Kids Bike Seat 22mm Seatpost Ultra Soft Waterproof PU Leather Bike
$3.23There is no AI review summary. -
Brake Levers, Brakes, ComponentsLightweight Aluminum Alloy Mountain Bike Disc Brake Lever with Bell
$16.29There is no AI review summary.Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Brake Rotors, Brakes, ComponentsMountain Bike Disc Brake Rotor G3 160/180/203mm 6 Bolts
$2.15 – $4.72There is no AI review summary.Select options This product has multiple variants. The options may be chosen on the product pageQuick View
